Do you know How to Replace Dirt Bike Tire? The dirt bike tire change does not come easy, not at first anyway, but if you know what to expect prior to diving in you can prepare for the inevitable both mentally (having patience) and physically (having all the right tools at your disposal). Once you notch a few tire changes under your belt the process becomes much easier and Actually takes very little time at all. Therefore, having a friend with experience who can help supervise really helps. If you learn better via the hands-on route nothing gets you back on two wheels than someone with experience showing you the ropes.
Few Things to Remember While Changing a Dirt Bike Tire
- Good Tire Iron Choice
- A Wrench Set
- Tire Changing Lube
Then Put Your Dirt Bike on a Stand and follow these given steps
- Unmount the wheel
- Disconnect the inner of your dirt bike tube and a tire rim lock
- Unmount the tire
- Inspect the rim
- Reset the inner tube and tire
Good Tire Iron Choice
There are many kinds of tire irons that you can get, but the best place to start is with Spoon Type Tire Irons. While these may look unusual to people who aren’t familiar with them, the spoon shape helps you slide it between the tire and the rim without catching on the inner tube. Being thinner also means that they assist the tire in sliding over it onto the wheel.
A Wrench Set
While these tools are not specific to dirt bikes, a wrench set is essential for the valve stem and rim lock nuts. One recommendation in this category is to get a set with ratcheting closed ends to make working in tight spaces easier also many other tools can benefit amateurs and experts in changing their dirt bike tires. Still, it’s a great place to start.
Tire Changing Lube
There is a lot of conflicting information online in terms of what kind of tire lube to use. Generally speaking, it is always best to use an approved tire mounting lubricant. However, some riders mention using mild vegetable oil or mild soap solution. Never, under any circumstance, use antifreeze, silicones, or petroleum-based lubricants, as these can cause significant damage.
Here the complete process of How to Replace Dirt Bike Tire. and tube
Unmount the Dirt Bike Wheel
After putting your Best dirt bike on a stand your very first step will be to unmount your dirt bike wheel. Continue by removing the axle nut, then loosen the four-axle pinch bolts. To remove the axle itself, you can use a T-wrench or a ratchet extension.
Disconnect the inner of your dirt bike tube and a tire rim lock
After unmounting the tour dirt bike wheel, disconnect the inner of your dirt bike tube and a tire rim lock. For this process, you only need to lose your rim lock nuts no need to open the nuts completely.
Unmount the tire
After the above two steps, now you need simply remove the tire and tube of your dirt bike from the rim. This is a little bit tricky that’s why to use the spray on both the tires and on the rim.
Inspect the Rim
This point of the process is a perfect opportunity to ensure that your rim tape is still in good shape. If dirt or dust gets into the tire, it will act like sandpaper on the inner tube while you’re riding, which quickly degrades it.
Reset the inner tube and tire
After the all steps have done which have been discussed above now is the time to reset the inner tube ad tire. The final step in your dirt bike tire change is re-mounting the wheel to the bike! This step is one of the easier ones, but I recommend spreading the brake pads with a flat-head screwdriver. Doing so helps to prevent the fork from spinning while you line up the brake disk.
You did all well It was looking difficult to start changing the tire and tube of your dirt bike but if you complete all the above steps successfully you did all well.
After reading all the above guides, you should have the right tools to replace dirt bike tires and have passion.